COMBINATION METER REASSEMBLY

CAUTION / NOTICE / HINT

Note


  • When removing and installing the combination meter glass, make sure not to touch the display panel.

  • Do not allow any dirt, fingerprints, grease, etc., to adhere to the combination meter glass. If the glass is dirty, wipe it clean with a soft cloth.

PROCEDURE


  1. INSTALL COMBINATION METER GLASS (for Type A)


    1. B004MCDC01
      B006ZFL Install in this Direction

      Engage the 8 claws to install the combination meter glass.

  2. INSTALL COMBINATION METER GLASS (for Type B)


    1. B004KI7C02
      B006ZFL Install in this Direction

      Install the combination meter glass as shown in the illustration.

      Note

      Do not remove the rear cover from the combination meter assembly as foreign matter may enter the combination meter assembly and cause a malfunction.

      B004K0AC02
      *1 Rear Cover
    2. B004MA0

      Using a "TORX" driver T10, install the combination meter glass with the 8 screws.