Click here

REAR DOOR COURTESY SWITCH INSPECTION

Click here
Click here

PROCEDURE


  1. *a Component without harness connected (Rear Door Courtesy Light Switch Assembly) *b Switch Body
    Click here

    INSPECT REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY


    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - Switch body Not pushed (ON) Below 1 Ω
      Pushed (OFF) 10 kΩ or higher

      If the result is not as specified, replace the rear door courtesy light switch assembly.