FRONT DOOR COURTESY SWITCH INSPECTION

PROCEDURE


  1. INSPECT FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY

    B004HDSC32
    *a

    Component without harness connected

    (Front Door Courtesy Light Switch Assembly)
    *b Switch Body

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - Switch body Not pushed (ON) Below 1 Ω
      Pushed (OFF) 10 kΩ or higher

      If the result is not as specified, replace the front door courtesy light switch assembly.