INSIDE HANDLE LIGHT(for Rear Side) INSPECTION

PROCEDURE


  1. INSPECT REAR DOOR INSIDE HANDLE ILLUMINATION LIGHT LH (NO. 2 INTERIOR ILLUMINATION LIGHT ASSEMBLY LH)

    B004MIYC10
    *a

    Component without harness connected

    (Rear Door Inside Handle Illumination Light LH (No. 2 Interior Illumination Light Assembly LH))

    1. Apply battery voltage to the connector and check that the rear door inside handle illumination light LH comes on.

      OK
      Measurement Condition Condition Specified Condition

      Battery positive (+) → 2 (+)

      Battery negative (-) → 1 (-)

      		 Always Rear door inside handle illumination light LH comes on

      If the result is not as specified, replace the rear door inside handle illumination light LH (No. 2 interior illumination light assembly LH).

  2. INSPECT REAR DOOR INSIDE HANDLE ILLUMINATION LIGHT RH (NO. 2 INTERIOR ILLUMINATION LIGHT ASSEMBLY RH)

    B004MIYC10
    *a

    Component without harness connected

    (Rear Door Inside Handle Illumination Light RH (No. 2 Interior Illumination Light Assembly RH))

    1. Apply battery voltage to the connector and check that the rear door inside handle illumination light RH comes on.

      OK
      Measurement Condition Condition Specified Condition

      Battery positive (+) → 2 (+)

      Battery negative (-) → 1 (-)

      		 Always Rear door inside handle illumination light RH comes on

      If the result is not as specified, replace the rear door inside handle illumination light RH (No. 2 interior illumination light assembly RH).