FOOTWELL LIGHT INSPECTION

PROCEDURE


  1. INSPECT FOOTWELL LIGHT LH (NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY)

    B004L6PC40
    *a

    Component without harness connected

    (Footwell Light LH (No. 1 Interior Illumination Light Assembly))

    1. Apply battery voltage to the connector and check that the footwell light LH comes on.

      OK
      Measurement Condition Condition Specified Condition

      Battery positive (+) → 2 (B)

      Battery negative (-) → 1 (E)

      		 Always Footwell light LH comes on

      If the result is not as specified, replace the footwell light LH (No. 1 interior illumination light assembly).

  2. INSPECT FOOTWELL LIGHT RH (NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY)

    B004L6PC41
    *a

    Component without harness connected

    (Footwell Light RH (No. 1 Interior Illumination Light Assembly))

    1. Apply battery voltage to the connector and check that the footwell light RH comes on.

      OK
      Measurement Condition Condition Specified Condition

      Battery positive (+) → 2 (B)

      Battery negative (-) → 1 (E)

      		 Always Footwell light RH comes on

      If the result is not as specified, replace the footwell light RH (No. 1 interior illumination light assembly).