GLOVE BOX LIGHT INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL GLOVE BOX LIGHT ASSEMBLY

   
   

   1. 

      Install in this Direction

      Turn the glove box light assembly as shown in the illustration to install it.

2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY (w/o Passenger Side Knee Airbag)

   Click here

3. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY (w/ Passenger Side Knee Airbag)

   Click here

4. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY (w/ Passenger Side Knee Airbag)

   Click here

5. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

6. INSTALL INSTRUMENT SIDE PANEL RH

   Click here

7. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

   Click here

8. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH

   Tech Tips

   Use the same procedure as for the LH side.

   Click here

9. INSTALL FRONT DOOR SCUFF PLATE RH

   Tech Tips

   Use the same procedure as for the LH side.

   Click here

10. INSTALL INSTRUMENT PANEL FINISH PLATE GARNISH

    Click here

11. INSTALL NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

    Click here

12. INSTALL NO. 1 METER HOOD CLUSTER

    Click here

13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Passenger Side Knee Airbag)

    for 2AR-FE:

    Click here

    for A25A-FKS:

    Click here

    for 2GR-FKS:

    Click here

14. PERFORM DIAGNOSTIC SYSTEM CHECK (w/ Passenger Side Knee Airbag)

    Click here

15. INSPECT SRS WARNING LIGHT (w/ Passenger Side Knee Airbag)

    Click here