Click here

GLOVE BOX LIGHT INSPECTION

Click here
Click here

PROCEDURE


  1. *a Component without harness connected (Glove Box Light Assembly)
    Click here

    INSPECT GLOVE BOX LIGHT ASSEMBLY


    1. Apply battery voltage to the connector and check that the glove box light comes on.

      OK
      Measurement Condition Condition Specified Condition

      Battery positive (+) → 2 (B)

      Battery negative (-) → 1 (L)

      		 Always Glove box light comes on

      If the result is not as specified, replace the glove box light assembly.