ROOM LIGHT REMOVAL

PROCEDURE


  1. REMOVE ROOM LIGHT ASSEMBLY (for Bulb Type)


    1. B006XV0C01
      *a Protective Tape
      B006ZY0 Front

      Using a screwdriver with its tip wrapped with protective tape, disengage the 4 claws to remove the room light lens.

    2. B0071IDC01
      *a Protective Tape
      B006ZY0 Front
      B006ZFL Remove in this Direction

      Using a screwdriver with its tip wrapped with protective tape, disengage the 4 claws as shown in the illustration to separate the room light housing.

    3. B006YGSC01
      *1 Room Light Switch Base

      Disengage the clamp.

    4. Disengage the 4 claws to disconnect the room light switch base from the room light housing.

  2. REMOVE REAR ROOM LIGHT BULB (for Bulb Type)


    1. Remove the rear room light bulb from the room light switch base.

  3. REMOVE SPOT LIGHT ASSEMBLY (for LED Type)


    1. B006YX7C01
      B006ZY0 Front

      Using a moulding remover, disengage the 8 claws.

    2. Disconnect the connector to remove the spot light assembly.