VANITY LIGHT BULB REPLACEMENT

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. SEPARATE VANITY LIGHT ASSEMBLY


    1. B004N0MC01
      *A for LH Side
      *B for RH Side

      Using a moulding remover, disengage the claw to separate the vanity light assembly.

  2. REMOVE VANITY LIGHT BULB


    1. B004HW0C01
      B006ZFL Remove in this Direction

      Remove the vanity light bulb from the bulb holder as shown in the illustration.

  3. INSTALL VANITY LIGHT BULB


    1. B004MNPC01
      B006ZFL Install in this Direction

      Install the vanity light bulb to the bulb holder as shown in the illustration.

  4. INSTALL VANITY LIGHT ASSEMBLY


    1. B004O41C01
      *A for LH Side
      *B for RH Side

      Engage the claw to install the vanity light assembly.