PERSONAL LIGHT INSPECTION

PROCEDURE

1. *a Component without harness connected (Map Light (Roof Console Box Sub-assembly))
   Click here

   INSPECT MAP LIGHT (ROOF CONSOLE BOX SUB-ASSEMBLY) (for Normal Roof without Door Linked Switch)

   
   

   1. Inspect the map light LH and map light RH.

      
      

      1. Apply battery voltage to the connector and check that the map light LH and map light RH come on.

         OK
         Measurement Condition Condition Specified Condition Battery positive (+) → 1 (+B1) Battery negative (-) → 4 (GND) Map light switch LH on Map light LH comes on Map light switch RH on Map light RH comes on

         If the result is not as specified, replace the map light (roof console box sub-assembly).

2. *a Component without harness connected (Map Light (Roof Console Box Sub-assembly))
   Click here

   INSPECT MAP LIGHT (ROOF CONSOLE BOX SUB-ASSEMBLY) (for Normal Roof with Door Linked Switch)

   
   

   1. Inspect the map light LH and map light RH.

      
      

      1. Apply battery voltage to the connector and check that the map light LH and map light RH come on.

         OK

         Measurement Condition Condition Specified Condition Battery positive (+) → 1 (+B1) Battery negative (-) → 4 (GND) Dome light switch off and map light switch LH on Map light LH comes on Dome light switch off and map light switch RH on Map light RH comes on Map light switch LH and RH off and dome light switch on Map light LH and RH come on Battery positive (+) → 1 (+B1) Battery negative (-) → 3 (DOOR) Map light switch LH and RH off and door linked switch on Map light LH and RH come on Map light switch LH and RH off and door linked switch off Map light LH and RH do not come on Battery positive (+) → 1 (+B1) Battery negative (-) → 2 (RLMP) Map light switch LH and RH off Map light LH and RH come on Map light switch LH and RH on Map light LH and RH do not come on

         If the result is not as specified, replace the map light (roof console box sub-assembly).

   2. Inspect the switch illumination and shift lever illumination.

      
      

      1. Apply battery voltage to the connector and check that the switch illumination and shift lever illumination come on.

         OK
         Measurement Condition Condition Specified Condition Battery positive (+) → 5 (ILLB) Battery negative (-) → 15 (LILL) Always Switch illumination and shift lever illumination come on

         If the result is not as specified, replace the map light (roof console box sub-assembly).

3. *a Component without harness connected (Map Light (Roof Console Box Sub-assembly))
   Click here

   INSPECT MAP LIGHT (ROOF CONSOLE BOX SUB-ASSEMBLY) (except Normal Roof)

   
   

   1. Inspect the map light LH and map light RH.

      
      

      1. Apply battery voltage to the connector and check that the map light LH and map light RH come on.

         OK

         Measurement Condition Condition Specified Condition Battery positive (+) → 14 (+B1) Battery negative (-) → 15 (GND) Dome light switch off and map light switch LH on Map light LH comes on Dome light switch off and map light switch RH on Map light RH comes on Map light switch LH and RH off and dome light switch on Map light LH and RH come on Battery positive (+) → 14 (+B1) Battery negative (-) → 1 (DOOR) Map light switch LH and RH off and door linked switch on Map light LH and RH come on Map light switch LH and RH off and door linked switch off Map light LH and RH do not come on Battery positive (+) → 14 (+B1) Battery negative (-) → 2 (RLMP) Map light switch LH and RH off Map light LH and RH come on Map light switch LH and RH on Map light LH and RH do not come on

         If the result is not as specified, replace the map light (roof console box sub-assembly).

   2. Inspect the switch illumination and shift lever illumination.

      
      

      1. Apply battery voltage to the connector and check that the switch illumination and shift lever illumination come on.

         OK
         Measurement Condition Condition Specified Condition Battery positive (+) → 28 (ILLB) Battery negative (-) → 17 (LILL) Always Switch illumination and shift lever illumination come on

         If the result is not as specified, replace the map light (roof console box sub-assembly).