THEFT DETERRENT SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Tech Tips

    Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body / Data List.

    5. Read the Data List according to the display on the GTS.


      Body Electrical > Main Body > Data List
      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      Key Unlock Warning SW Unlock warning switch*1 OFF or ON

      OFF: Ignition key not inserted

      ON: Ignition key inserted

      		 -
      ACC SW Ignition switch OFF or ON

      OFF: Ignition switch off

      ON: Ignition switch ACC

      		 -
      IG SW Ignition switch OFF or ON

      OFF: Ignition switch off or ACC

      ON: Ignition switch ON

      		 -
      RR Door Courtesy SW Rear door courtesy light switch assembly (for RH) OFF or ON

      OFF: Rear door RH closed

      ON: Rear door RH open

      		 -
      RL Door Courtesy SW Rear door courtesy light switch assembly (for LH) OFF or ON

      OFF: Rear door LH closed

      ON: Rear door LH open

      		 -
      FR Door Lock Pos Front door RH unlock detection switch LOCK or UNLOCK

      LOCK: Front door RH locked

      UNLOCK: Front door RH unlocked

      		 -
      FR Door Courtesy SW Front door courtesy light switch assembly (for RH) OFF or ON

      OFF: Front door RH closed

      ON: Front door RH open

      		 -
      FL Door Lock Pos Front door LH unlock detection switch LOCK or UNLOCK

      LOCK: Front door LH locked

      UNLOCK: Front door LH unlocked

      		 -
      FL Door Courtesy SW Front door courtesy light switch assembly (for LH) OFF or ON

      OFF: Front door LH closed

      ON: Front door LH open

      		 -
      Hood Courtesy SW Engine hood courtesy switch OFF or ON

      OFF: Engine hood closed

      ON: Engine hood open

      		 -
      RR-Door Lock Pos SW Rear door RH unlock detection switch OFF or ON

      OFF: Rear door RH locked

      ON: Rear door RH unlocked

      		 -
      RL-Door Lock Pos SW Rear door LH unlock detection switch OFF or ON

      OFF: Rear door LH locked

      ON: Rear door LH unlocked

      		 -
      Luggage Courtesy SW Luggage compartment door courtesy light switch signal OFF or ON

      OFF: Luggage compartment door closed

      ON: Luggage compartment door open

      		 -
      Intrusion Sens OFF SW Intrusion sensor cancel switch*2 OFF or ON

      OFF: Intrusion sensor cancel switch off

      ON: Intrusion sensor cancel switch on

      		 Not applicable
      Glass Break Sensor Detection Glass breakage sensor breakage detection*2 OFF or ON

      OFF: Glass breakage sensor breakage not detected

      ON: Glass breakage sensor breakage detected

      		 Not applicable
      Intrusion Sensor Detection status of the intrusion sensor (theft warning ultrasonic sensor)*2 OFF or ON

      OFF: Intrusion not detected

      ON: Intrusion detected

      		 Not applicable
      Intrusion Sen Conn Intrusion sensor (theft warning ultrasonic sensor) connection*2 OFF or ON

      OFF: Intrusion sensor not connected

      ON: Intrusion sensor connected

      		 Not applicable
      Intrusion Sensor Sound Detect Sound detection status of the intrusion sensor (theft warning ultrasonic sensor)*2 OFF or ON

      OFF: Sound not detected

      ON: Sound detected

      		 Not applicable
      Panic Function Setting of customize setting "Panic Function"*3 OFF or ON Customize setting displayed -
      Intrusion Win Opened Setting of customize setting "Intrusion Win Opened"*2 OFF or ON Customize setting displayed Not applicable

      • *1: w/o Smart Entry and Start System

      • *2: Although the item is displayed on the GTS, it is not applicable to this vehicle.

      • *3: w/ Panic Switch

  2. ACTIVE TEST

    Tech Tips

    Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body or Entry&Start* / Active Test.


      • *: w/ Smart Entry and Start System

    5. Perform the Active Test according to the display on the GTS.


      Body Electrical > Main Body > Active Test
      Tester Display Measurement Item Control Range Diagnostic Note
      Security Indicator Security indicator*1 OFF/ON -
      Security Horn2 Theft warning siren assembly*2 OFF/ON Not applicable
      Vehicle Horn Vehicle horns OFF/ON -
      Security Horn Security horn assembly OFF/ON -
      Power For Intrusion Sensor Intrusion sensor (theft warning ultrasonic sensor) power supply*2 OFF/ON Not applicable

      • *1: w/o Smart Entry and Start System

      • *2: Although the item is displayed on the GTS, it is not applicable to this vehicle.


      Body Electrical > Entry&Start > Active Test
      Tester Display Measurement Item Control Range Diagnostic Note
      Immobiliser Indicator Security indicator* OFF/ON -

      • *: w/ Smart Entry and Start System