ELECTRICAL KEY OSCILLATOR(for Rear Floor) INSTALLATION

PROCEDURE

1. INSTALL NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY

   
   

   1. Engage the clamp to install the No. 1 indoor electrical key antenna assembly.

      Note

      Be careful when installing the No. 1 indoor electrical key antenna assembly. If the No. 1 indoor electrical key antenna assembly is dropped, replace it with a new one.

   2. Connect the connector.

2. INSTALL REAR SEAT CUSHION LOCK HOOK (for Fixed Seat Type)

   Click here

3. INSTALL REAR SEAT CUSHION ASSEMBLY (for Fixed Seat Type)

   Click here

4. CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY (for Fixed Seat Type)

   Click here

5. INSTALL REAR SEAT CUSHION LOCK HOOK (for Fold Down Seat Type)

   Click here

6. INSTALL REAR SEAT CUSHION ASSEMBLY (for Fold Down Seat Type)

   Click here

7. CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY (for Fold Down Seat Type)

   Click here

8. INSTALL REAR SEAT CUSHION LOCK HOOK (for Reclining Seat Type)

   Click here

9. INSTALL REAR SEAT CUSHION ASSEMBLY (for Reclining Seat Type)

   Click here

10. CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY (for Reclining Seat Type)

    Click here