LUGGAGE COMPARTMENT DOOR LOCK INSPECTION

PROCEDURE


  1. INSPECT LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY


    1. Check the operation of the door lock motor.


      1. B004JT7C01
        *a Close (Lock)
        *b Open (Unlock)
        *c

        Component without harness connected

        (Luggage Compartment Door Lock Assembly)

        Move the door lock to the close (lock) position.

      2. Apply battery voltage to the door lock motor and check the operation of the door lock motor.

        OK
        Battery Connection Result

        Battery positive (+) → Terminal 1

        Battery negative (-) → Terminal 2

        		 Luggage compartment door lock motor open (unlock) operation

        If the result is not as specified, replace the luggage compartment door lock assembly.

    2. Check the operation of the luggage compartment door courtesy switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        2 - 3 Closed (Locked) 10 kΩ or higher
        2 - 3 Open (Unlocked) Below 1 Ω

        If the result is not as specified, replace the luggage compartment door lock assembly.