FRONT DOOR LOCK INSPECTION

PROCEDURE


  1. INSPECT FRONT DOOR LOCK WITH MOTOR ASSEMBLY LH


    1. B004L61C17
      *a Unlock
      *b Lock
      *c

      Component without harness connected

      (Front Door Lock with Motor Assembly LH)

      Check the operation of the door lock motor.


      1. Apply battery voltage and check the operation of the door lock motor.

        OK
        Battery Connection Result

        Battery positive (+) → Terminal 4

        Battery negative (-) → Terminal 1

        		 Locks

        Battery positive (+) → Terminal 1

        Battery negative (-) → Terminal 4

        		 Unlocks

        If the result is not as specified, replace the front door lock with motor assembly LH.

    2. Check the operation of the door unlock detection switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        7 - 8 Locked 10 kΩ or higher
        7 - 8 Unlocked Below 1 Ω

        If the result is not as specified, replace the front door lock with motor assembly LH.

    3. B004JJNC10
      *a Unlock
      *b Neutral
      *c Lock
      *d

      Component without harness connected

      (Front Door Lock with Motor Assembly LH)

      Check the operation of the door key lock and unlock switch. (for LHD)


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        9 - 7 Held to lock side Below 1 Ω
        9 - 7 Neutral or held to unlock side 10 kΩ or higher
        10 - 7 Held to unlock side Below 1 Ω
        10 - 7 Neutral or held to lock side 10 kΩ or higher

        If the result is not as specified, replace the front door lock with motor assembly LH.

  2. INSPECT FRONT DOOR LOCK WITH MOTOR ASSEMBLY RH


    1. B004O3XC20
      *a Unlock
      *b Lock
      *c

      Component without harness connected

      (Front Door Lock with Motor Assembly RH)

      Check the operation of the door lock motor.


      1. Apply battery voltage and check the operation of the door lock motor.

        OK
        Battery Connection Result

        Battery positive (+) → Terminal 4

        Battery negative (-) → Terminal 1

        		 Locks

        Battery positive (+) → Terminal 1

        Battery negative (-) → Terminal 4

        		 Unlocks

        If the result is not as specified, replace the front door lock with motor assembly RH.

    2. Check the operation of the door unlock detection switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        7 - 8 Locked 10 kΩ or higher
        7 - 8 Unlocked Below 1 Ω

        If the result is not as specified, replace the front door lock with motor assembly RH.

    3. B004LR2C28
      *a Unlock
      *b Neutral
      *c Lock
      *d

      Component without harness connected

      (Front Door Lock with Motor Assembly RH)

      Check the operation of the door key lock and unlock switch. (for RHD)


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        5 - 8 Held to unlock side Below 1 Ω
        5 - 8 Neutral or held to lock side 10 kΩ or higher
        6 - 8 Held to lock side Below 1 Ω
        6 - 8 Neutral or held to unlock side 10 kΩ or higher

        If the result is not as specified, replace the front door lock with motor assembly RH.