WIRELESS DOOR LOCK CONTROL SYSTEM(w/o Smart Entry and Start System) DIAGNOSIS SYSTEM

SELF-DIAGNOSTIC MODE (USING GTS)

1. Connect the GTS to the DLC3.

2. Turn the ignition switch to ON.

3. Turn the GTS on.

4. Enter the following menus: Body Electrical / Main Body / Utility / Wireless Door Lock Diagnosis Mode.

   
   
   1. Body Electrical > Main Body > Utility

      Tester Display
      Wireless Door Lock Diagnosis Mode

   2. 
      
      1. 
         
   3. 
      
      10. 
          

5. Proceed to the next step in accordance with the prompts on the GTS screen.

6. 

   Table 1. Wireless Door Lock Buzzer Output

   *1	ON
   *2	OFF
   *3	T1: 0.25 seconds
   *4	T2: 0.5 seconds

   Check that the system has switched to self-diagnostic mode by checking the wireless door lock buzzer output pattern.

7. 

   Inspect the diagnostic outputs when the door control transmitter module set sub-assembly switch is pressed. The diagnostic outputs can be checked by the wireless door lock buzzer output pattern.

   Table 2. Result:

   Wireless Door Lock Buzzer Output	Suspected Area
   A	Normal (No malfunction)
   B	Register wireless code
   C	Wave interference or malfunction of a related component