POWER DOOR LOCK CONTROL SYSTEM OPERATION CHECK

CHECK CUSTOMIZE PARAMETERS

CHECK BASIC FUNCTIONS

1. Check that all of the doors lock when the lock side of the door control switch is pressed.

2. Check that all of the doors unlock when the unlock side of the door control switch is pressed.

3. Check that all of the doors lock when the driver door key cylinder is turned to lock using the mechanical key.

4. Check that all of the doors unlock when the driver door key cylinder is turned to unlock using the mechanical key.*1

5. Check that only the driver door unlocks when the driver door lock cylinder is turned to unlock once using the key and all of the doors unlock when it is turned to unlock again.*2

   
   

   • *1: w/o Canister Pump Module

   • *2: w/ Canister Pump Module

CHECK THE KEY LOCK-IN PREVENTION FUNCTION

1. Turn the ignition switch to ON or ACC.

2. With the driver door open, check that all of the doors unlock immediately after the door lock knob for the driver door is pressed.

3. With the driver door open, check that all of the doors unlock immediately after the lock side of the door control switch is pressed.

4. With the driver door open, press the driver door lock knob and hold it for 2 seconds or more, then close the driver door and check that all of the doors unlock.

CHECK THE SECURITY FUNCTION OF THE DOOR LOCK CONTROL SYSTEM

1. Close all of the doors and leave the driver door window open so that the door control switch can be operated from outside the vehicle. (Step 1)

2. Hold the outside handle of the driver door, open and close the door while holding the handle open (confirm that the lock knob remained in the lock position). Then, check that the doors do not unlock when the unlock side of the door control switch is pressed from outside the vehicle.

3. Starting from Step 1, with the key outside the vehicle, close and lock the driver door using the mechanical key. Then, check that the doors do not unlock when the unlock side of the door control switch is pressed from outside the vehicle.

4. Starting from Step 1, with the key outside the vehicle, close and lock the driver door using wireless key operation or entry operation*. Then, check that the doors do not unlock when the unlock side of the door control switch is pressed from outside the vehicle.

   Tech Tips

   Check that the security function of the door lock control system is canceled under the following conditions:

   
   

   • The ignition switch is turned to ON.

   • The driver door is unlocked using the key.

   • The unlock side of the door control switch is pressed after the door lock knob is unlocked manually.

   • The doors are unlocked by wireless operation.

   • The doors are unlocked by entry operation.*

   
   

   • *: w/ Smart Entry and Start System

CHECK THE KEY-LINKED 2-STEP UNLOCK FUNCTION

1. Lock all doors.

2. Check that only the driver door unlocks when the driver door lock cylinder is turned to unlock once using the key and all of the doors unlock when it is turned to unlock again.

CHECK THE SHIFT LINKED AUTOMATIC DOOR LOCK FUNCTION (w/ Auto Lock Function)

1. With the shift lever in P and the ignition switch ON, check that all doors lock automatically when the shift lever is moved to any position other than P.

CHECK THE SPEED-SENSITIVE AUTOMATIC DOOR LOCK FUNCTION (w/ Auto Lock Function)

1. When any door is unlocked and the vehicle is driven at approximately 20 km/h (12 mph) or more, check that all of the doors lock automatically.

CHECK THE SHIFT LINKED AUTOMATIC DOOR UNLOCK FUNCTION (w/ Auto Lock Function)

1. With the shift lever in any position other than P and the ignition switch ON, check that all doors unlock automatically when the shift lever is moved to P.

CHECK THE DRIVER DOOR-LINKED AUTOMATIC DOOR UNLOCK FUNCTION (w/ Auto Lock Function)

1. When the driver door is closed, turning the ignition switch from ON to off and opening the driver door within approximately 43 seconds will automatically unlock all doors.