NETWORK GATEWAY ECU INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. Click here

   INSTALL CENTRAL GATEWAY ECU (NETWORK GATEWAY ECU) (for LHD, w/o ECU Integration Box RH)

   
   

   1. Engage the clamp.

   2. Connect the central gateway ECU (network gateway ECU) connector.

   3. Install the central gateway ECU (network gateway ECU) with the nut.

      7.5 N*m

      76 kgf*cm

      66 in.*lbf

2. Click here

   INSTALL CENTRAL GATEWAY ECU (NETWORK GATEWAY ECU) (for LHD, w/ ECU Integration Box RH)

   
   
   1. 

      Engage the 2 claws to install the central gateway ECU (network gateway ECU).

      Note:

      Make sure that the central gateway ECU (network gateway ECU) is securely installed.

3. Click here

   INSTALL ECU INTEGRATION BOX RH (for LHD, w/ ECU Integration Box RH)

   
   

   1. Install the ECU integration box RH with the bolt and nut.

      Bolt
      7.5 N*m	76 kgf*cm	66 in.*lbf
      Nut
      5.5 N*m	56 kgf*cm	49 in.*lbf

   2. Engage the 2 clamps.

   3. Connect each connector.

4. Click here

   INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY (for LHD, w/o Passenger Side Knee Airbag)

   Click here

5. Click here

   INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY (for LHD, w/ Passenger Side Knee Airbag)

   Click here

6. Click here

   INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY (for LHD, w/ Passenger Side Knee Airbag)

   Click here

7. Click here

   INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

   Click here

8. Click here

   INSTALL INSTRUMENT SIDE PANEL RH (for LHD)

   Click here

9. Click here

   INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH (for LHD)

   Click here

10. Click here

    INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH (for LHD)

    Tip:

    Use the same procedure as for the LH side.

    Click here

11. Click here

    INSTALL FRONT DOOR SCUFF PLATE RH (for LHD)

    Tip:

    Use the same procedure as for the LH side.

    Click here

12. Click here

    INSTALL INSTRUMENT PANEL FINISH PLATE GARNISH (for LHD)

    Click here

13. Click here

    INSTALL NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY (for LHD)

    Click here

14. Click here

    INSTALL NO. 1 METER HOOD CLUSTER (for LHD)

    Click here

15. Click here

    CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (for LHD)

    for 2AR-FE:

    Click here

    for A25A-FKS:

    Click here

    for 2GR-FKS:

    Click here

16. Click here

    PERFORM DIAGNOSTIC SYSTEM CHECK (for LHD, w/ Passenger Side Knee Airbag)

    Click here

17. Click here

    INSPECT SRS WARNING LIGHT (for LHD, w/ Passenger Side Knee Airbag)

    Click here

18. Click here

    INSTALL CENTRAL GATEWAY ECU (NETWORK GATEWAY ECU) (for RHD, w/o ECU Integration Box RH)

    
    

    1. Connect the central gateway ECU (network gateway ECU) connector.

    2. Install the central gateway ECU (network gateway ECU) with the nut.

       7.5 N*m

       76 kgf*cm

       66 in.*lbf

19. Click here

    INSTALL CENTRAL GATEWAY ECU (NETWORK GATEWAY ECU) (for RHD, w/ ECU Integration Box RH)

    
    
    1. 

       Engage the 2 claws to install the central gateway ECU (network gateway ECU).

       Note:

       Make sure that the central gateway ECU (network gateway ECU) is securely installed.

20. Click here

    INSTALL ECU INTEGRATION BOX RH (for RHD, w/ ECU Integration Box RH)

    
    

    1. Install the ECU integration box RH with the bolt and 2 nuts.

       Bolt
       7.5 N*m	76 kgf*cm	66 in.*lbf
       Nut
       5.5 N*m	56 kgf*cm	49 in.*lbf

    2. Engage the clamp.

    3. Connect each connector.

21. Click here

    INSTALL NO. 3 INSTRUMENT PANEL TO COWL BRACE SUB-ASSEMBLY (for RHD)

    Tip:

    Use the same procedure as for LHD.

    Click here

22. Click here

    INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (for RHD, w/ Driver Side Knee Airbag)

    Click here

23. Click here

    INSTALL NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY (for RHD, w/o Driver Side Knee Airbag)

    Tip:

    Use the same procedure as for LHD.

    Click here

24. Click here

    INSTALL NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY (for RHD, w/ Driver Side Knee Airbag)

    Tip:

    Use the same procedure as for LHD.

    Click here

25. Click here

    CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY (for RHD)

    Tip:

    Use the same procedure as for LHD.

    Click here

26. Click here

    INSTALL NO. 2 METER HOOD CLUSTER (for RHD)

    Tip:

    Use the same procedure as for LHD.

    Click here

27. Click here

    INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

    Click here

28. Click here

    INSTALL INSTRUMENT SIDE PANEL RH (for RHD)

    Tip:

    Use the same procedure as for LHD.

    Click here

29. Click here

    INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH (for RHD)

    Tip:

    Use the same procedure as for the LH side.

    Click here

30. Click here

    INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH (for RHD)

    Tip:

    Use the same procedure as for the LH side.

    Click here

31. Click here

    INSTALL FRONT DOOR SCUFF PLATE RH (for RHD)

    Tip:

    Use the same procedure as for the LH side.

    Click here

32. Click here

    INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL (for RHD)

    Tip:

    Use the same procedure as for LHD.

    Click here

33. Click here

    INSTALL NO. 1 METER HOOD CLUSTER (for RHD)

    Tip:

    Use the same procedure as for LHD.

    Click here

34. Click here

    CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (for RHD)

    for 2AR-FE:

    Click here

    for 2GR-FKS:

    Click here

35. Click here

    PERFORM DIAGNOSTIC SYSTEM CHECK (for RHD, w/ Driver Side Knee Airbag)

    Click here

36. Click here

    INSPECT SRS WARNING LIGHT (for RHD, w/ Driver Side Knee Airbag)

    Click here