WIRELESS DOOR LOCK CONTROL SYSTEM(w/ Smart Entry and Start System) OPERATION CHECK

Note

Make sure that the vehicle is in an area that allows the wireless control function to operate.

Tech Tips


  • The switches described in this text are the switches for transmitting signals. The switches are built into the electrical key transmitter sub-assembly.

  • All the functions listed below must be checked in comparison with the wireless door lock control operation area.


  1. CHECK CUSTOMIZE PARAMETERS


    1. The operation check below is based on the non-customized initial condition of the vehicle.

      Click here

  2. CHECK BASIC FUNCTIONS


    1. Check that the LED of the electrical key transmitter sub-assembly illuminates and turns off 3 times when each switch is pressed and held for 5 seconds.

      Tech Tips

      If the transmitter LED illuminates once or twice but not a third time when the switch has been pressed and held for 5 seconds or more, it may have a weak battery.

    2. Check that all of the doors lock when the lock switch is pressed.

    3. Check that all of the doors unlock when the unlock switch is pressed.*1

    4. Check that the driver door unlocks when the unlock switch is pressed once, and all of the doors unlock when pressed twice within 5 seconds.*2

    5. Check that the luggage compartment door opens when the luggage open switch is pressed and held for 0.8 seconds or more.


      • *1: w/o Canister Pump Module

      • *2: w/ Canister Pump Module

  3. CHECK THE CHATTERING PREVENTION FUNCTION


    1. Press and hold the lock or unlock switch on the electrical key transmitter sub-assembly and check that the corresponding operation occurs only once and is not repeated continuously while the switch is held. Then press the switch repeatedly at 1-second intervals, check that the corresponding operation is carried out.

  4. CHECK THE SWITCH OPERATION FALL-SAFE FUNCTION


    1. Check that the doors cannot be locked/unlocked by operating a switch on an unregistered electrical key transmitter sub-assembly, but that the doors can be locked/unlocked by operating a switch on the registered electrical key transmitter sub-assembly.

  5. CHECK THE REPEAT FUNCTION


    1. Check that all of the doors attempt to automatically lock 1 second after the lock switch has been pressed while the driver door control knob is being held in the unlock position.

  6. CHECK THE AUTOMATIC LOCKING FUNCTION


    1. Check that the doors lock automatically if none of the doors have been opened or all of the doors have not been locked within approximately 30 seconds of all of the doors being unlocked by pressing the unlock switch.

    2. Check that the automatic locking function does not operate when any door has been opened within approximately 30 seconds of unlocking the doors by pressing the unlock switch.

    3. Check that the automatic locking function does not operate when all of the doors have been locked manually (such as using key linked operation, or by pressing the lock switch) within approximately 30 seconds of unlocking the doors by pressing the unlock switch.

  7. CHECK THE DOOR AJAR WARNING BUZZER FUNCTION


    1. Check that the wireless door lock buzzer sounds for approximately 5 seconds when the lock switch is pressed with any of the doors ajar or open.

  8. CHECK THE ANSWER-BACK (HAZARD WARNING LIGHT) FUNCTION


    1. When the lock switch is pressed, check that the hazard warning lights flash once simultaneously with the locking operation of all of the doors.

    2. When the unlock switch is pressed, check that the hazard warning lights flash twice simultaneously with the unlocking operation of all of the doors.

  9. CHECK THE ANSWER-BACK (WIRELESS DOOR LOCK BUZZER) FUNCTION


    1. When the lock switch is pressed, check that the buzzer sounds once simultaneously with the locking operation of all of the doors.

    2. When the unlock switch is pressed once, check that the buzzer sounds twice simultaneously with the unlocking operation of the driver door.

  10. Tech Tips

    The doors can be unlocked even when a door is open or ajar.

    CHECK THE DOOR LOCK STOP FUNCTION THAT OPERATES WHEN A DOOR IS OPEN/AJAR


    1. With a door open or ajar, check that the doors cannot be locked by operating the lock switch.

  11. CHECK THE PANIC ALARM CONTROL FUNCTION (w/ Panic Function)

    Click here

  12. CHECK THE ILLUMINATED ENTRY FUNCTION

    Click here

  13. CHECK THE PANORAMIC MOON ROOF OPERATION FUNCTION (w/ Panoramic Moon Roof System)

    Click here

  14. CHECK THE POWER WINDOW OPERATION FUNCTION (w/o Canister Pump Module)

    Click here