ULTRASONIC SENSOR(for Rear) INSPECTION

PROCEDURE


  1. INSPECT REAR CORNER ULTRASONIC SENSOR


    1. B006Z2AC02
      *a

      Component without harness connected

      (Rear Corner Ultrasonic Sensor)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 (BI) - 5 (EI) Always 10 kΩ or higher
      1 (BI) - 2 (BO) Always Below 1 Ω
      3 (SI) - 4 (SO) Always Below 30 Ω
      5 (EI) - 6 (EO) Always Below 1 Ω

      If the result is not as specified, replace the rear corner ultrasonic sensor.