CLEARANCE WARNING BUZZER(for RHD) REMOVAL

PROCEDURE

1. Click here

   REMOVE NO. 1 METER HOOD CLUSTER (w/o Driver Side Knee Airbag)

   Tip:

   Use the same procedure as for LHD.

   Click here

2. Click here

   REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL (w/o Driver Side Knee Airbag)

   Tip:

   Use the same procedure as for LHD.

   Click here

3. Click here

   REMOVE FRONT DOOR SCUFF PLATE RH

   Tip:

   Use the same procedure as for LHD.

   Click here

4. Click here

   REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH

   Tip:

   Use the same procedure as for LHD.

   Click here

5. Click here

   DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH

   Tip:

   Use the same procedure as for the LH side.

   Click here

6. Click here

   REMOVE INSTRUMENT SIDE PANEL RH

   Tip:

   Use the same procedure as for LHD.

   Click here

7. Click here

   REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

8. Click here

   REMOVE NO. 2 METER HOOD CLUSTER

   Tip:

   Use the same procedure as for LHD.

   Click here

9. Click here

   DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

   Tip:

   Use the same procedure as for LHD.

   Click here

10. Click here

    REMOVE NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY (w/o Driver Side Knee Airbag)

    Tip:

    Use the same procedure as for LHD.

    Click here

11. Click here

    REMOVE NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY (w/ Driver Side Knee Airbag)

    Tip:

    Use the same procedure as for LHD.

    Click here

12. Click here

    REMOVE NO. 1 CLEARANCE WARNING BUZZER

    
    
    1. 

       Disengage the clamp.

    2. Disconnect the connector to remove the No. 1 clearance warning buzzer.