CLEARANCE WARNING ECU(for RHD) INSTALLATION
PROCEDURE
-
INSTALL CLEARANCE WARNING ECU ASSEMBLY
-
Install in this Direction Engage the claw to install the clearance warning ECU assembly as shown in the illustration.
-
-
INSTALL ECU INTEGRATION BOX RH
-
INSTALL NO. 3 INSTRUMENT PANEL TO COWL BRACE SUB-ASSEMBLY
-
INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (w/ Driver Side Knee Airbag)
-
INSTALL NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY (w/o Driver Side Knee Airbag)
-
INSTALL NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY (w/ Driver Side Knee Airbag)
-
CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
-
INSTALL NO. 2 METER HOOD CLUSTER
-
INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
-
INSTALL INSTRUMENT SIDE PANEL RH
-
INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH
-
INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH
-
INSTALL FRONT DOOR SCUFF PLATE RH
-
INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL
-
INSTALL NO. 1 METER HOOD CLUSTER
-
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
for 2AR-FE:
for A25A-FKS:
for 2GR-FKS:
-
PERFORM DIAGNOSTIC SYSTEM CHECK
-
INSPECT SRS WARNING LIGHT
-
PERFORM CALIBRATION