MULTIPLEX TILT AND TELESCOPIC ECU REMOVAL

PROCEDURE


  1. CHANGE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM SETTINGS

    Click here

  2. REMOVE LOWER STEERING COLUMN COVER SUB-ASSEMBLY

    Click here

  3. REMOVE MULTIPLEX TILT AND TELESCOPIC ECU


    1. B006X3UC01
      *a Protective Tape
      B006ZFL Remove in this direction

      Disconnect the connector.

    2. Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws and remove the multiplex tilt and telescopic ECU.