STEERING COLUMN ASSEMBLY(for Power Tilt and Power Telescopic Steering Column) DISASSEMBLY

CAUTION / NOTICE / HINT

Note

Before replacing the steering lock actuator assembly, refer to Service Bulletin.

PROCEDURE


  1. REMOVE STEERING LOCK ACTUATOR ASSEMBLY


    1. Secure the steering column assembly in a vise between aluminum plates.

      Note

      Do not overtighten the vise.

    2. Using a drill, drill a hole in the 2 steering lock set bolts and insert a screw extractor.

    3. B004IRE

      Using the screw extractor, remove the 2 steering lock set bolts and steering lock actuator assembly.