ELECTRIC PARKING BRAKE SYSTEM DTC CHECK / CLEAR


  1. CHECK DTC AND FREEZE FRAME DATA (USING GTS)


    1. Turn the ignition switch off.

    2. Connect the GTS to the DLC3.

    3. Turn the ignition switch to ON.

    4. Turn the GTS on.

    5. Enter the following menus: Chassis / ABS/VSC/TRC/EPB Trouble Codes.


      Chassis > ABS/VSC/TRC > Trouble Codes

    6. Check for DTCs.

      Click here

      Note

      The electric parking brake system outputs DTCs for the following system. When DTCs other than those in Diagnostic Trouble Code Chart for the electric parking brake system are output, refer to Diagnostic Trouble Code Chart for the relevant system.

      System Proceed to
      Vehicle Stability Control System

      Click here

    7. Check the freeze frame data.


      1. If DTCs are output, check the freeze frame data and read the vehicle status when the DTC was stored.

      Tech Tips

      for Freeze Frame Data: Click here

  2. CLEAR DTC AND FREEZE FRAME DATA (USING GTS)


    1. Turn the ignition switch off.

    2. Connect the GTS to the DLC3.

    3. Turn the ignition switch to ON.

    4. Turn the GTS on.

    5. Enter the following menus: Chassis / ABS/VSC/TRC/EPB Trouble Codes.

    6. Clear the DTCs.


      Chassis > ABS/VSC/TRC > Clear DTCs

      Tech Tips

      When DTCs are cleared, the freeze frame data will also be cleared.