VACUUM WARNING SWITCH INSTALLATION

PROCEDURE


  1. INSTALL CHECK VALVE GROMMET


    1. Install a new check valve grommet to the brake booster assembly.

  2. INSTALL VACUUM WARNING SWITCH ASSEMBLY


    1. for LHD:


      1. B006YTBC01
        *a 30° +/- 20°
        B006ZY0 Up

        Install the vacuum warning switch assembly to the brake booster assembly as shown in the illustration.

      2. Connect the connector to the vacuum warning switch assembly.

    2. for RHD:


      1. B006X2TC01
        *a 30° +/- 10°
        B006ZY0 Up

        Install the vacuum warning switch assembly to the brake booster assembly as shown in the illustration.

      2. Connect the connector to the vacuum warning switch assembly.

  3. INSTALL BATTERY (for LHD)

    for A25A-FKS: Click here

    for 2GR-FKS: Click here

  4. INSTALL FRONT CENTER UPPER SUSPENSION BRACE SUB-ASSEMBLY (for RHD)

    Click here

  5. INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY (for RHD)

    Click here