BRAKE MASTER CYLINDER(for RHD) DISASSEMBLY

PROCEDURE


  1. REMOVE BRAKE MASTER CYLINDER STRAIGHT PIN


    1. Secure the brake master cylinder sub-assembly in a vise.

      Note

      Place aluminum plates on the vise to prevent damage to the brake master cylinder sub-assembly.

    2. B004MUV

      Using a 5 mm pin punch and a hammer, tap out the brake master cylinder straight pin from the brake master cylinder sub-assembly.

      Note

      Do not drop the brake master cylinder reservoir assembly.

  2. REMOVE BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY


    1. Remove the brake master cylinder reservoir assembly from the brake master cylinder body.

  3. REMOVE MASTER CYLINDER RESERVOIR GROMMET


    1. B004MGS

      Remove the 2 master cylinder reservoir grommets from the brake master cylinder body.

    2. Remove the brake master cylinder body from the vise.

  4. REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY

  5. REMOVE BRAKE MASTER CYLINDER RESERVOIR STRAINER