VEHICLE STABILITY CONTROL SYSTEM, Diagnostic DTC:C1300

DTC Code DTC Name
C1300 Skid Control ECU Malfunction

DESCRIPTION

The skid control ECU (brake actuator assembly) stores this DTC if malfunctions are found in a circuit inside the ECU by self diagnosis.

DTC No. Detection Item DTC Detection Condition Trouble Area
C1300 Skid Control ECU Malfunction Internal failure of the skid control ECU (brake actuator assembly). Skid control ECU (brake actuator assembly)

PROCEDURE


  1. REPLACE BRAKE ACTUATOR ASSEMBLY


    1. Replace the skid control ECU (brake actuator assembly).

      for LHD: Click here

      for RHD: Click here

      Tech Tips

      This DTC is output when the skid control ECU (brake actuator assembly) detects a malfunction in an internal circuit.

    2. Enter the following menus: Chassis / ABS/VSC/TRC / Utility / Test Mode.

    3. Perform system variant learning and acceleration sensor zero point calibration.

      Click here


      Chassis > ABS/VSC/TRC > Utility
      Tester Display
      Test Mode

    4. Enter the following menus: Chassis / ABS/VSC/TRC / Utility / Signal Check.

    5. Perform the sensor check using the Test Mode (Signal Check) procedure.

      Click here


      Chassis > ABS/VSC/TRC > Utility
      Tester Display
      Signal Check
      Result
      Proceed to
      NEXT

    NEXT

    END