REAR SHOCK ABSORBER DISPOSAL

PROCEDURE


  1. DISPOSE OF REAR SHOCK ABSORBER ASSEMBLY

    CAUTION:


    • Always use a cloth to prevent shards of metal flying about due to the release of pressurized gas.

    • Always wear safety glasses.

    B004MKP

    Tech Tips

    The gas is colorless, odorless and non-poisonous.


    1. B004MEE

      Extend the piston rod and secure the rear shock absorber assembly at an angle in a vise.

    2. Using a hacksaw, slowly make a hole at the position indicated by the arrow in the illustration to discharge the gas inside.