FRONT LOWER SUSPENSION ARM(for 2AR-FE RH Side) INSTALLATION

PROCEDURE

1. Click here

   INSTALL FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY RH

   
   

   1. Install the front lower arm bushing stopper to the front lower No. 1 suspension arm sub-assembly RH.

   2. 

      Install the front lower No. 1 suspension arm sub-assembly RH to the front frame assembly with the 3 bolts and nut in the order shown in the illustration.

      Bolt (1), (2)
      200 N*m	2039 kgf*cm	148 ft.*lbf
      Bolt (3)
      135 N*m	1377 kgf*cm	100 ft.*lbf

      Note:

      Because the nut has its own stopper, do not turn the nut. Tighten the bolt with the nut secured.

   3. Connect the front lower No. 1 suspension arm sub-assembly RH to the front lower ball joint assembly RH with the bolt and 2 nuts.

      92 N*m

      938 kgf*cm

      68 ft.*lbf

2. Click here

   INSTALL FRONT FENDER APRON SEAL RH

   Click here

3. Click here

   INSTALL FRONT WHEEL

   Click here

4. Click here

   INSPECT AND ADJUST FRONT WHEEL ALIGNMENT

   Click here

5. Click here

   PERFORM INITIALIZATION

   Parking assist monitor system	Click herefor Initialization Click herefor Calibration
   Lighting system (EXT)	Click here