REAR AXLE HUB INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL REAR AXLE HUB AND BEARING ASSEMBLY


    1. Install the rear axle hub and bearing assembly and rear disc brake dust cover sub-assembly to the rear axle carrier sub-assembly with the 4 bolts.

      Torque:
      90 N*m  { 918 kgf*cm, 66 ft.*lbf }

  2. INSPECT REAR AXLE HUB BEARING LOOSENESS

    Click here

  3. INSPECT REAR AXLE HUB RUNOUT

    Click here

  4. INSTALL REAR DISC

    Click here

  5. INSTALL REAR DISC BRAKE CALIPER ASSEMBLY

    Click here

  6. CONNECT NO. 2 PARKING BRAKE WIRE ASSEMBLY


    1. Connect the No. 2 parking brake wire assembly connector to the parking brake actuator assembly.

    2. Connect the No. 2 parking brake wire assembly connector to the rear axle hub and bearing assembly.

  7. INSTALL REAR WHEEL

    Click here

  8. CHECK FOR SPEED SENSOR SIGNAL

    Click here