STEERING KNUCKLE INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL STEERING KNUCKLE


    1. Secure the steering knuckle between aluminum plates in a vise.

      Note

      Do not overtighten the vise.

    2. Install the front axle hub sub-assembly and front disc brake dust cover to the steering knuckle with the 4 bolts.

      Torque:
      120 N*m  { 1224 kgf*cm, 89 ft.*lbf }

      Note


      • Be careful not to damage the speed sensor rotor or contact surfaces.

      • Do not allow foreign matter to contact the speed sensor rotor or contact surfaces.

  2. INSTALL FRONT LOWER BALL JOINT ASSEMBLY

    Click here

  3. INSTALL FRONT AXLE ASSEMBLY

    Click here