FRONT DRIVE SHAFT ASSEMBLY(for 2AR-FE) INSPECTION

PROCEDURE


  1. INSPECT FRONT DRIVE SHAFT ASSEMBLY


    1. B004KOU

      Check that there is no excessive play in the radial direction of the outboard joint.

    2. Check that the inboard joint slides smoothly in the thrust direction.

    3. Check that there is no excessive play in the radial direction of the inboard joint.

    4. Check the boots for damage.

    5. B0070R4C05
      *A for LH Side
      *B for RH Side

      Check whether the drive shaft dimension (A) is within specification.

      Note

      Keep the drive shaft assembly level during inspection.

      Dimension (A)
      for LH Side 591.2 mm (1.94 ft.)
      for RH Side 910.0 mm (2.98 ft.)