OIL PUMP REASSEMBLY

PROCEDURE


  1. INSTALL FRONT OIL PUMP OIL SEAL


    1. B004KEYN05

      Coat the lip of a new front oil pump oil seal with a small amount of MP grease.

    2. Using SST and a hammer, install the front oil pump oil seal to the front oil pump body sub-assembly.

      SST
      09350-32014   ( 09351-32140 )
      Standard Depth
      -0.25 to 0.25 mm (-0.00984 to 0.00984 in.)

      Note

      The seal end should be level with the outer edge of the front oil pump body sub-assembly.

  2. INSTALL FRONT OIL PUMP BODY O-RING


    1. B004JQY

      Coat a new front oil pump body O-ring with Toyota Genuine ATF WS and install it to the front oil pump body sub-assembly.

      Note

      Ensure that the front oil pump body O-ring is not twisted.

  3. INSTALL FRONT OIL PUMP DRIVEN GEAR


    1. B004MMR

      Coat the front oil pump driven gear with Toyota Genuine ATF WS and install it to the front oil pump body sub-assembly with the marked side facing upward.

  4. INSTALL FRONT OIL PUMP DRIVE GEAR


    1. B004J1U

      Coat the front oil pump drive gear with Toyota Genuine ATF WS, and install it to the front oil pump body sub-assembly with the marked side facing upward.

  5. INSTALL STATOR SHAFT ASSEMBLY


    1. B004IZVN09

      Align each knock pin of the stator shaft assembly with the holes in the front oil pump body sub-assembly and install the stator shaft assembly to the front oil pump body sub-assembly.

    2. Using a T30 "TORX" socket wrench, install the 16 bolts.

      Torque:
      9.3 N*m  { 95 kgf*cm, 82 in.*lbf }
      Bolt Length
      Bolt (A)
      14 mm (0.551 in.)
      Bolt (B)
      26 mm (1.02 in.)

  6. INSPECT FRONT OIL PUMP BODY SUB-ASSEMBLY

    Click here