DYNAMIC RADAR CRUISE CONTROL SYSTEM(for 2AR-FE) DTC CHECK / CLEAR


  1. CHECK DTC


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Powertrain / Radar Cruise 1*1 or Radar Cruise 2*2 / Trouble Codes.

    5. Check for DTCs.


      Powertrain > Radar Cruise1 > Trouble Codes
      Powertrain > Radar Cruise2 > Trouble Codes

    • *1: Stored in the ECM

    • *2: Stored in the millimeter wave radar sensor assembly

  2. CLEAR DTC


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Powertrain / Radar Cruise 1*1 or Radar Cruise 2*2 / Clear DTCs.

    5. Clear the DTCs.


      Powertrain > Radar Cruise1 > Clear DTCs
      Powertrain > Radar Cruise2 > Clear DTCs

    • *1: Stored in the ECM

    • *2: Stored in the millimeter wave radar sensor assembly