DYNAMIC RADAR CRUISE CONTROL SYSTEM(for 2AR-FE), Diagnostic DTC:P1578

DTC Code DTC Name
P1578 Brake System

DESCRIPTION

This DTC is stored when a malfunction is detected in the vehicle stability control system.

DTC No. Detection Item DTC Detection Condition Trouble Area
P1578 Brake System While the ignition switch is ON and the dynamic radar cruise control system is operating, a malfunction in the vehicle stability control system is detected for 0.2 seconds or more.

  • Vehicle stability control system

  • ECM

CAUTION / NOTICE / HINT

Note


  • First check the CAN communication system by following How to Proceed with Troubleshooting. After checking that there are no malfunctions in the CAN communication system, proceed with troubleshooting.

    Click here

  • Before replacing the ECM, refer to Service Bulletin.

PROCEDURE


  1. CHECK FOR DTCs (VEHICLE STABILITY CONTROL SYSTEM)


    1. Check for DTCs.


      Chassis > ABS/VSC/TRC > Trouble Codes
      Result
      Result Proceed to
      DTCs are not output A
      DTCs are output B

    B

    GO TO VEHICLE STABILITY CONTROL SYSTEM Click here

    A

  2. CHECK FOR DTCs (CRUISE CONTROL SYSTEM)


    1. Clear the DTCs.


      Powertrain > Radar Cruise1 > Clear DTCs

    2. Perform the following procedure.

      Tech Tips

      If the following procedure is not performed, the previously output DTC cannot be detected.


      1. Turn the ignition switch to ON.

      2. Turn the dynamic radar cruise control system on using the cruise control main switch.

      3. Wait for 1 second or more.

    3. Check for DTCs.


      Powertrain > Radar Cruise1 > Trouble Codes
      Result
      Result Proceed to
      DTC P1578 is not output A
      DTC P1578 is output B

    A

    USE SIMULATION METHOD TO CHECK Click here

    B

    REPLACE ECM Click here