CRUISE CONTROL SYSTEM(for 2AR-FE) FAIL-SAFE CHART

Tech Tips

If any of the following conditions are detected while the cruise control system is controlling vehicle speed, the system clears the vehicle speed stored in the ECM and cancels control of vehicle speed by the cruise control system.

Auto Cancel Condition	Warning			Fail-safe Deactivation Condition
Auto Cancel Condition	Multi-information Display	Master Warning Light	Warning Buzzer	Fail-safe Deactivation Condition
Open or short in stop light switch circuit	Cruise Control Malfunction Visit Your Dealer	Illuminates	Sounds	Cruise control system is turned off and back on again using the cruise control main switch.
Problem with stop light switch input circuit Problem with cruise control main switch cancel circuit Malfunction is detected in the vehicle stability control system Communication stop between skid control ECU (brake actuator assembly) and ECM	Cruise Control Malfunction Visit Your Dealer	Illuminates	Sounds	Ignition switch is turned off and back to ON again.
If the following condition occurs, the ECM cancels control of vehicle speed by the cruise control system (Stored vehicle speed is maintained): Vehicle speed is less than approximately 40 km/h (25 mph) while driving with the cruise control system controlling vehicle speed	-	Does not illuminate	-	+RES switch is pushed.
Malfunction is detected in SFI system	-	Illuminates	-	Cruise control system is turned off and back on again using the cruise control main switch.
Vehicle speed is less than stored vehicle speed by approximately 16 km/h (10 mph) or more	-	Does not illuminate	-	-SET switch is pushed.
Vehicle stability control system operates while driving with cruise control system controlling vehicle speed TRC system operates for a certain period of time while driving with cruise control system controlling vehicle speed. TRC is turned off VSC is turned off	-	Does not illuminate	-	+RES switch is pushed.