CRUISE CONTROL SYSTEM(for 2AR-FE) PRECAUTION


  1. PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable from the negative (-) battery terminal, initialize the following system(s) after the cable is reconnected:

    System See Procedure
    Lane departure alert system (w/ Steering Control)

    Click here

    Pre-collision system
    Parking assist monitor system

  2. IGNITION SWITCH EXPRESSIONS


    1. The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.

      Expression Ignition Switch (Position) Engine Switch (Condition)
      Ignition Switch off LOCK Off (Lock)
      Ignition Switch ACC ACC On (ACC)
      Ignition Switch ON ON On (IG)
      Engine start START On (Start)

  3. CONSTRUCTION


    1. B006Y7YC01
      *1 Steering Pad Switch Assembly
      *a Cruise Control Main Switch
      *b -SET Switch
      *c +RES Switch
      *d CANCEL Switch

      The cruise control switch is located on the right side of the steering pad switch assembly.

  4. HANDLING PRECAUTION FOR CRUISE CONTROL SYSTEM


    1. Turn the cruise control system off using the cruise control main switch when not using the cruise control system.

    2. Be careful when driving downhill with the cruise control system controlling vehicle speed as the vehicle speed may exceed the set speed.

    3. The + (ACCEL)/RES (RESUME) operation changes according to the cruise control system status. When the cruise control system is controlling vehicle speed, the + (ACCEL) function operates. When the cruise control system is not controlling vehicle speed, the RES (RESUME) function operates.

    4. While the cruise control system is controlling vehicle speed, if the cruise control indicator turns off and a warning message is displayed, turn the cruise control system off using the cruise control main switch to reset the cruise control system. After the cruise control system is reset, if the cruise control system does not turn on, or if the cruise control system stops functioning immediately after being turned on, there may be a malfunction.

    5. Do not use the cruise control system where the road conditions are as follows:


      • Heavy traffic

      • Steep downhill roads

      • Roads with sharp turns

      • Icy or snowy roads

      • Slippery roads

    6. Do not use the cruise control system while towing.