STARTER INSTALLATION

PROCEDURE

1. INSTALL STARTER ASSEMBLY

   
   

   1. Install the starter assembly with the 2 bolts.

      Torque:

      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

   2. Connect the engine wire to the terminal 30 with the nut.

      Torque:

      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

   3. Close the terminal cap.

   4. Connect the starter assembly connector.

2. INSTALL BATTERY CLAMP SUB-ASSEMBLY

   Click here

3. INSTALL ECM

   Click here

4. INSTALL AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE

   Click here

5. INSTALL INLET AIR CLEANER ASSEMBLY

   Click here

6. INSTALL V-BANK COVER SUB-ASSEMBLY

   Click here

7. INSTALL COOL AIR INTAKE DUCT SEAL

   Click here

8. INSTALL BATTERY

   Click here