Click here

IGNITION SWITCH INSPECTION

Click here
Click here

PROCEDURE


  1. Click here

    INSPECT IGNITION OR STARTER SWITCH ASSEMBLY


    1. B0071HEC01
      *a

      Component without harness connected

      (Ignition or Starter Switch Assembly)
      *b LOCK
      *c ACC
      *d ON
      *e START

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      Between all terminals LOCK 10 kΩ or higher
      6 (ACC) - 7 (AM1) ACC Below 1 Ω
      6 (ACC) - 7 (AM1) - 8 (IG1) ON Below 1 Ω
      1 (AM2) - 2 (IG2)
      5 (ST1) - 7 (AM1) - 8 (IG1) START Below 1 Ω
      1 (AM2) - 2 (IG2) - 4 (ST2)