ENGINE OIL COOLER REMOVAL

PROCEDURE


  1. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

    Click here

  2. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH

    Click here

  3. REMOVE NO. 1 ENGINE UNDER COVER

    Click here

  4. REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY

    Click here

  5. DRAIN ENGINE COOLANT

    Click here

  6. DRAIN ENGINE OIL

    Click here

  7. REMOVE OIL COOLER ASSEMBLY


    1. B006X1UC01
      *1 No. 1 Water By-pass Hose
      *2 No. 2 Water By-pass Hose

      Slide the 2 clips and disconnect the No. 1 water by-pass hose and No. 2 water by-pass hose from the oil cooler assembly.

    2. B006ZWW

      Remove the 4 bolts and oil cooler assembly from the cylinder block sub-assembly.

    3. B006ZQJ

      Remove the 2 oil cooler gaskets from the oil cooler assembly.

    4. B006XCS

      Remove the oil control valve filter from the cylinder block sub-assembly.