OIL LEVEL SENSOR INSTALLATION

CAUTION / NOTICE / HINT

Note

This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click here

PROCEDURE


  1. INSTALL ENGINE OIL LEVEL SENSOR


    1. Using an 8 mm socket wrench, install the engine oil level sensor to the engine balancer assembly with the 2 bolts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

    2. Install a new clip to the engine oil level sensor.

    3. Connect the engine oil level sensor connector.

  2. INSTALL NO. 2 OIL PAN SUB-ASSEMBLY

    Click here

  3. ADD ENGINE OIL

    Click here

  4. INSPECT FOR ENGINE OIL LEAK

    Click here

  5. CHECK ENGINE OIL LEVEL

    Click here

  6. INSTALL NO. 2 ENGINE UNDER COVER ASSEMBLY

    Click here

  7. INSTALL NO. 1 ENGINE UNDER COVER

    Click here

  8. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH

    Click here

  9. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH

    Click here