OIL PRESSURE SENSOR REMOVAL

Click here

PROCEDURE

1. Click here

   REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

   Click here

2. Click here

   REMOVE FRONT WHEEL OPENING EXTENSION PAD LH

   Click here

3. Click here

   REMOVE NO. 1 ENGINE UNDER COVER

   Click here

4. Click here

   REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY

   Click here

5. Click here

   REMOVE OIL PRESSURE SENSOR (OIL PRESSURE SENDER GAUGE ASSEMBLY)

   
   

   1. Disconnect the oil pressure sensor (oil pressure sender gauge assembly) connector.

   2. 

      Using a 27 mm deep socket wrench, remove the oil pressure sensor (oil pressure sender gauge assembly) from the cylinder block sub-assembly.