EGR VALVE INSPECTION

PROCEDURE


  1. INSPECT EGR VALVE ASSEMBLY


    1. B004I62C01
      *a

      Component without wire harness connected

      (EGR Valve Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 (EGA+) - 2 (EGA-) 20°C (68°F) 3.1 to 3.7 Ω
      3 (EGB-) - 4 (EGB+)

      If the result is not as specified, replace the EGR valve assembly.