FUEL PRESSURE SENSOR(for High Pressure) INSTALLATION

CAUTION / NOTICE / HINT

Note

This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click here

PROCEDURE


  1. INSTALL FUEL PRESSURE SENSOR

    Tech Tips

    Perform "Inspection After Repair" after replacing the fuel pressure sensor.

    Click here


    1. B007119C01
      *a Cutout (Fuel Delivery Pipe)
      *b Cutout (Fuel Pressure Sensor)

      Temporarily install a new fuel pressure sensor to the fuel delivery pipe as shown in the illustration.

      Note

      Make sure that the cutout of the fuel delivery pipe is aligned with the cutout of the fuel pressure sensor.

    2. B00719XC01
      *a Cutout (Fuel Pressure Sensor)
      *b Cutout (No. 1 Fuel Pressure Sensor Holder)

      Temporarily install the No. 1 fuel pressure sensor holder to the fuel delivery pipe as shown in the illustration.

      Note

      Make sure that the cutout of the fuel pressure sensor is aligned with the cutout of the No. 1 fuel pressure sensor holder.

    3. Using an 8 mm socket wrench, install the 2 bolts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

    4. Connect the fuel pressure sensor connector.

  2. INSTALL INTAKE MANIFOLD

    Click here

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  4. INSPECT FOR FUEL LEAK

    Click here

  5. PERFORM INITIALIZATION


    1. Perform "Inspection After Repair" after replacing the fuel pressure sensor.

      Click here