Click here

FUEL INJECTOR(for Direct Injection) INSPECTION

Click here
Click here Click here

PROCEDURE


  1. Click here

    INSPECT DIRECT FUEL INJECTOR ASSEMBLY

    Note:

    This inspection is for checking the direct fuel injector assembly for an open or short. Because the direct fuel injector assembly of this vehicle is a high-pressure type, fuel injection volume cannot be checked.


    1. B004IYGC01
      *a

      Component without harness connected

      (Direct Fuel Injector Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 20°C (68°F) 1.34 to 1.64 Ω

      If the result is not as specified, replace the direct fuel injector assembly.