FUEL PRESSURE PULSATION DAMPER INSTALLATION

PROCEDURE

1. INSTALL FUEL PRESSURE PULSATION DAMPER ASSEMBLY

   
   

   1. Apply a light coat of gasoline or spindle oil to a new O-ring.

   2. Install the O-ring to the fuel pressure pulsation damper assembly.

   3. Install the fuel pressure pulsation damper assembly to the fuel delivery pipe with the 2 bolts.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note

      Make sure that the O-ring is not cracked or jammed when installing the fuel pressure pulsation damper assembly.

2. CONNECT FUEL TUBE SUB-ASSEMBLY

   
   

   1. Connect the fuel tube sub-assembly to the fuel delivery pipe.

      Click here

   2. Engage the 2 claws to install a new No. 2 fuel pipe clamp.

   3. Engage the clamp to connect the fuel tube sub-assembly to the fuel hose clamp.

3. INSTALL AIR CLEANER CAP WITH AIR CLEANER HOSE

   Click here

4. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

   Click here

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

6. INSPECT FOR FUEL LEAK

   Click here