FRONT CRANKSHAFT OIL SEAL INSTALLATION

CAUTION / NOTICE / HINT

Note

This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click here

PROCEDURE


  1. INSTALL TIMING CHAIN COVER OIL SEAL


    1. Apply MP grease to the lip of a new timing chain cover oil seal.

      Note


      • Keep the lip free from foreign matter.

      • Do not allow MP grease to contact the dust seal.

    2. B006YY9C01
      *a 0 to 2 mm

      Using SST and a hammer, tap in the timing chain cover oil seal.

      SST
      09223-00010
      Standard Depth
      0 to 2 mm (0 to 0.0787 in.) (From the edge of the No. 2 timing gear cover assembly)

      Note

      Do not tap in the timing chain cover oil seal at an angle.

  2. INSTALL CRANKSHAFT PULLEY ASSEMBLY

    Click here

  3. INSTALL V-RIBBED BELT

    Click here

  4. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE

    Click here