ACCELERATOR PEDAL REMOVAL

PROCEDURE


  1. REMOVE FRONT DOOR SCUFF PLATE RH (for RHD)

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH (for RHD)

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  3. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    for LHD: Click here

    for RHD: Click here

  4. REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY

    Note


    • Avoid physical shock to the accelerator pedal sensor assembly.

    • Do not disassemble the accelerator pedal sensor assembly.

    • The accelerator pedal sensor assembly does not require lubrication.

    • Do not apply oil or other lubricants to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.


    1. B006ZNFC01
      *A for LHD
      *B for RHD

      Disconnect the accelerator pedal sensor assembly connector.

    2. Remove the 3 nuts and disconnect the rod of the accelerator pedal sensor assembly from the accelerator pedal to remove the accelerator pedal sensor assembly.

      Note

      If the accelerator pedal sensor assembly has been struck or dropped, replace it.

  5. REMOVE ACCELERATOR PEDAL PAD


    1. B006WYD

      Disengage the 4 claws and remove the accelerator pedal pad from the accelerator pedal.

  6. REMOVE ACCELERATOR PEDAL


    1. B006YGT

      Remove the 2 bolts.

    2. B006ZMHC01
      *a Vehicle Body
      B006ZFL Remove in this Direction (1)
      B006WSJ Remove in this Direction (2)

      Push the accelerator pedal in the direction indicated by the arrow (1) shown in the illustration to disengage the claw.

    3. Pull the accelerator pedal in the direction indicated by the arrow (2) shown in the illustration to remove it.