ACCELERATOR PEDAL REMOVAL

PROCEDURE

1. Click here

   REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

2. Click here

   REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY

   Note:
   

   • Avoid physical shock to the accelerator pedal sensor assembly.

   • Do not disassemble the accelerator pedal sensor assembly.

   • The accelerator pedal sensor assembly does not require lubrication.

   • Do not apply oil or other lubricants to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.

   
   
   1. 

      Disconnect the accelerator pedal sensor assembly connector.

   2. Remove the 3 nuts and disconnect the rod of the accelerator pedal sensor assembly from the accelerator pedal to remove the accelerator pedal sensor assembly.

      Note:

      If the accelerator pedal sensor assembly has been struck or dropped, replace it.

3. Click here

   REMOVE ACCELERATOR PEDAL PAD

   
   
   1. 

      Disengage the 4 claws and remove the accelerator pedal pad from the accelerator pedal.

4. Click here

   REMOVE ACCELERATOR PEDAL

   
   
   1. 

      Remove the 2 bolts.

   2. 

      *a	Vehicle Body
      	Remove in this Direction (1)
      	Remove in this Direction (2)

      Push the accelerator pedal in the direction indicated by the arrow (1) shown in the illustration to disengage the claw.

   3. Pull the accelerator pedal in the direction indicated by the arrow (2) shown in the illustration to remove it.