FRONT CRANKSHAFT OIL SEAL INSTALLATION

PROCEDURE


  1. INSTALL TIMING CHAIN COVER OIL SEAL


    1. Apply MP grease to the lip of a new timing chain cover oil seal.

      Note


      • Keep the lip free from foreign matter.

      • Do not allow MP grease to contact the dust seal.

    2. B006XV8C02
      *a -0.75 to -1.45 mm (-0.0295 to -0.0571 in.)

      Using SST and a hammer, tap in the timing chain cover oil seal.

      SST
      09636-20010
      Standard Depth
      -0.75 to -1.45 mm (-0.0295 to -0.0571 in.) (From the edge of the timing chain cover sub-assembly)

      Note

      Do not tap in the timing chain cover oil seal at an angle.

  2. INSTALL CRANKSHAFT PULLEY


    1. Align the crankshaft timing gear key with the key groove of the crankshaft pulley.

    2. B006Z3CC01
      *a Hold
      *b Turn

      Using SST, hold the crankshaft pulley and install the crankshaft pulley bolt.

      SST
      09213-54015
      09330-00021
      Torque:
      260 N*m  { 2651 kgf*cm, 192 ft.*lbf }

      Tech Tips

      Insert a few washers (total thickness: approximately 5.0 mm (0.197 in.)) between SST (09213-70011) and SST (09214-00030).

  3. INSTALL V-RIBBED BELT

    Click here

  4. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE

    Click here